Internal battery of EYE-02 and EyeSee camera will power the camera for approximately 24 hours. This is useful e.g. in case of AC power failure.

The backup time 24 hours only applies if EYE-02 is used with one of predefined profiles or EyeSee is used in configuration selected in installation wizard. Adjusting configuration of detectors may decrease this time. In case you activate MIP (motion in picture) sensor the backup time will be approximately 40% of the original time (10 hours). If IR illuminaton is also ON the backup time will be approximately only 20% of the original time (5 hours). Also, each communication of camera via GSM network will decrease the backup time – especially if you use camera in area with low GSM signal.

For more information about powering EYE-02 or EyeSee camera from external battery or solar panel click here.