The EYE-02 camera is enrolled into the system in similar manner as sub control panel. The camera reports event to the master control panel; camera arms and disarms together with control panel arming and disarming.

Enrolling the camera into control panel

1. Enter *0 service code to switch the master panel to Service mode (default service code is 8080)
2. Simultaneously press both right buttons on the key fob to switch the EYE-02 camera into Settings mode (three beeps will confirm successful switching).



3. Press button 1 to switch the master panel to Learn mode.
4. Press the top right key fob button to switch the camera to Learn mode (camera will confirm with single beep). Camera will send out an enrollment code and will be enrolled to the master panel.



5. Press # on the master panel to end the Learn mode.
6. Enter 290 on the master panel to enrol the panel into the camera to be able to control it. Camera must still be in Enroll mode.
7. Press # on the master panel to end Service mode.
8. Press any key fob button to end Enroll mode on the camera.



9. The camera now reports to the master control panel. Arming and disarming of camera is done together with the master panel. Reporting to camera users (SMS, emails…) remains intact.