{"id":1183,"date":"2013-10-03T14:29:23","date_gmt":"2013-10-03T12:29:23","guid":{"rendered":"http:\/\/www.noabe.com\/help\/?p=1183"},"modified":"2025-10-29T15:41:30","modified_gmt":"2025-10-29T14:41:30","slug":"flood-detector-and-security-camera","status":"publish","type":"post","link":"https:\/\/www.noabe.com\/help\/index.php\/flood-detector-and-security-camera\/","title":{"rendered":"Flood detector and security camera"},"content":{"rendered":"

EYE-02 is compatible with a number of wireless peripherals like detectors, buttons or sirens. The periferals offer new ways of using EYE-02 camera, like monitoring of water in places where you expect a flood. Camera with flood detector will inform you about rising water and you will be able to take action in time. Application note describes situations in which flood detector can help you. You will also learn how to make the flood detector work with your EYE-02 camera.<\/p>\n

Where flood detector will help<\/h2>\n

Monitoring cellar at home<\/strong>
\nYou live in a family house. Every year heavy rains raise the level of water under the terrain. Your cellar always gets flooded. As you already use the camera at home, you will just add flood detector to the camera. You do not need to check the cellar regularly. You can rely on the camera – it will call you, send SMS, MMS or email and you will know that water is rising.<\/p>\n

Monitoring your cottage remotely<\/strong>
\nYour weekend cottage lies in the valley with a brook. In spring it happened several that the bottom of your cottage was flooded. You did not know about it for one week until you arrived at the cottage. And after one week there was a lot of damage. Camera with flood detector will inform you when cottage gets flooded. You will know in time that water is coming.<\/p>\n

\"APN<\/a><\/p>\n

Monitoring river in your town<\/strong>
\nDo you live in a town where floods happen every spring? Everyone will feel more comfortable when they know about the rising water. With EYE-02 camera this is sipmle. If water reaches critical mark camera will call them, send SMS or MMS. They will inform everyone about what is happening. Camera will also to take pictures of the river every 10 minutes all day long. Camera will be sending these pictures to the Cloud storage (our cloud servers provide safe storage and fast access to data in your camera). Officials in chage of monitoring the water will browse through these pictures in www.jablotool.com<\/a>. They can also publish the latest picture on the website.<\/p>\n

\"APN<\/p>\n

Camera installed outdoors should not be directly exposed to rain and snow. Wireless transmitter is not waterproof, it must not be flooded by water. Protect transmitter from wet climate, see Flood detector installation<\/a> below for more information. Flood detector itself is waterproof.<\/p>\n

What you need<\/h2>\n

Besides the EYE-02 security camera you will need two detectors from the system OASIS manufatured by Jablotron:<\/p>\n

<\/p>\n\n\n\n
\"JA-81M JA-81M Door detector<\/td>\n\"LD-81 LD-81 Flood detector<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

<\/center>
\nDetector will work as a wireless transmitter for the flood detector.<\/p>\n

Installation<\/h2>\n

1 Connect flood detector to the transmitter<\/h3>\n
    \n
  1. Flood detector ends with a white wire. Remove the last 2cm of its insulation. You will see four small wires. Remove the insulation of the red and black wire. Cut off the blue and yellow wire as you will not need them.\n<\/li>\n
  2. Open the transmitter by a screwdriver and take its green board out of the white casing.<\/li>\n
  3. Remove the clamp between IN1 and GND. There are two more clamps. They connect IN2 with TMP and TMP with GND. Keep these two clamps in their original position.<\/li>\n
  4. Attach the wires of LD-81 into JA-81M:
    a. Insert red wire into IN 1
    b. Insert black wire into GND
  5. Make a small hole on the side of transmitter casing. You will pull the white wire of flood detector here.<\/li>\n
  6. Fit the green board of transmitter back into its white plastic.<\/li>\n<\/ol>\n

    <\/p>\n\n\n\n
    \"APN<\/a><\/td>\n\"APN<\/a><\/td>\n\"APN<\/a><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

    <\/center><\/p>\n

    2 Enroll transmitter into camera<\/h3>\n
      \n
    1. Switch your camera to Enroll mode:
      \na. Connect to the camera in       JabloTool<\/a>
      \nb. Select Settings, Advanced, Peripherals. Click on Add new device.<\/li>\n
    2. Insert battery into the door detector. It will enroll into the camera. Give a name to this detector in Jablotool. <\/li>\n<\/ol>\n

      Pull the white wire through the hole in transmitter casing and close the transmitter.<\/p>\n

      <\/p>\n\n\n\n
      \"APN<\/a><\/td>\n\"APN<\/a><\/td>\n\"APN<\/a><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

      <\/center><\/p>\n

      <\/a>3 Install flood detector, transmitter and camera<\/h3>\n

      Before you begin with installation please consider some aspects:<\/p>\n

      Communication range<\/strong><\/p>\n