EYE-02 Release notes

Mobile security camera

 Bugfix: Adjustment of internal PIR detector sensitivity after camera start-up.

 Bugfix: Sensitivity of camera internal PIR detector was significantly decreased under very specific conditions.

 First SW version for camera EYE-02i 3G, SW version begins with JR620.x.x.xx.
To see the SW version connect to the camera in www.jablotool.com and select Settings > Camera status.

 New feature: Faster connecting to camera in www.jablotool.com when camera sends data to Cloud storage.
 New feature: Faster retry of unsuccessful connection to www.jablotool.com . This prevents timeout and makes connecting to camera in JabloTool more reliable.
 New feature: Improved data connection of EYE-02 3G when 3G signal is poor and camera is connected to 2G network.
 New feature: SMS with accents are now longer; function that removes national characters does not remove characters that are in GSM basic set.
 New feature: Faster processing of incoming SMS by the camera. Camera will respond faster to SMS commands.
 New feature: Faster data transmission on EYE-02 2G when GSM module is stable.
 Bugfix: More stable operation of camera with fewer aborts.
 Bugfix: Data connection of EYE-02 2G is now more stable.
 Bugfix: Connecting to EYE-02 3G in cases when the APN User name and Password were required.

 New feature: TILT and TOUCH detectors now make Tamper alarm when they are activated. Before they made Intruder alarm. Tamper alarm better describes the logic of these detectors.
 New feature: Framerate of video recorded in SLEEP mode is now adjustable. You will configure it together with framerate of video recorded in WATCH mode. One setting applies to both videos.
 New feature: MIP detector is optimized. It has lower sensitivity to prevent false alarms. It also better detects large objects and passing cars.
 Bugfix: Masking of MIP detector fixed. You can mark certain parts of the monitored area which will be ignored by MIP detector. When you turned the camera up side down (e.g. mounted camera on a ceiling) this mask did not turn up side down. This is now fixed.
 Bugfix: Configuration of Timers fixed. Example: your camera is in Watch mode e.g. at 9 a.m. You configured Timers so that camera is in Sleep mode automatically from 7 a.m. to 5 p.m. Then camera switched to Sleep mode after you saved changes. Based on Timers, camera was supposed to be in Sleep mode in this period in the future. This is now fixed. Camera will not switch to Sleep or Watch mode after you save configuration of Timers

 New feature: Support for Clicker (wireless peripheral for switching camera to SLEEP or WATCH mode)
 New feature: Camera sends also the event „Recording video in SLEEP mode“ to Cloud storage (or ARC)
 New feature: Maximum size of video files recorded on SD card is now 15MB (download of video via internet is more stable)
 Bugfix: Incorrect overwriting of events in reporting queue can stop periodical reporting and make Watchdog alarm – fixed
 Bugfix: Events which camera could not send are not erased correctly from reporting queue. This blocks reporting to Cloud storage – fixed
 Bugfix: Incoming call from phone number with restricted caller ID is interpreted as if the call was made from the previous phone number – fixed
 Bugfix: User exits USB mode without making any changes that would be written on SD card. This makes SD card error – fixed

 New feature: Video streaming
 New feature: Automatic image rotation (e.g. for easy mounting on ceiling)
 New feature: Period of sending periodical reports can be set in minutes
 New feature: Image noise reduction introduced
 Default remote access password 0000 introduced (set after each reset to factory defaults)
 Internal sensors diagnostics triggers an error state only when the particular detector is switched on
 More stable connection of camera to JabloTool.com (timeout optimisation)
 Validity of sent text messages (SMS) set to 12 hours (originally 5 minutes)
 Also in the error state camera can be switched to WATCH mode normally (sound warning is played)
 Bugfix: Unsolicited sending of reports to the second contact when error on the first contact occurs – fixed
 Bugfix: Not working reporting to user (SMS, MMS, e-mail) when reporting to CMS using Jablotron IP protocol is active – fixed
 Bugfix: Attempt to read data from closed TCP connection (when sending MMS on Orange SK 3G network) – fixed
 Bugfix: False detection of lost connection with wireless sensor (when sensor does not have the control transmissions feature implemented) – fixed

 New features: Support of JabloTool 2.0 and JabloTool Applications
 New features: Pre-alarm recording – enables to record up to 12 frames before an alarm
 New features: Touch, Tilt and Door opening detectors fully separated
 New features: Video streaming – 3G only; receiving will be implemented soon
 New features: Limit of alarms sent in 24 hours
 New features: Video confirmation – after finishing data transfer camera waits up to 5 minutes whether JabloTool.com will request connection
 New features: Reporting priorities revised – event based reporting
 New features: Video is recorded and stored for each event (and only video is stored)
 New features: Data counters – counts SMS, MMS and data sent by your camera
 Bugfix: MMS on request bug fix
 Bugfix: Support of Jablotron AC-88 Smart socket bug fix
 Bugfix: False alarms of PIR after turning IR on – bug fixed

Legal notice: This firmware uses code of FFmpeg licensed under the LGPLv2.1 and its source can be downloaded here.

EYE-02 release notes